Globe Router Models: Identify the Device Before You Log In

Globe uses or supplies different modem, router, ONU/ONT, LTE/5G CPE, and mesh devices. There is no universal Globe model, login IP, username, or password. Identify the manufacturer and exact model on the physical label, read the active default gateway, and use the management method supported by that device and firmware.

This page separates confirmed facts from community-reported model associations. It does not publish unverified superadmin credentials.

Find Your Globe Router Model

Find Globe Router Model Number Infographic
Find Globe Router Model Number

Look on the back, bottom, side, removable cover, or device screen for:

  • Manufacturer or brand: Huawei, TP-Link, FiberHome, ZTE, Tozed, or another vendor
  • Model / Model Name: for example, EG8145V5 or EG8145X6-10
  • Hardware version or revision
  • SSID / WLAN Name
  • WiFi Password / WLAN Key
  • Modem IP / Web UI / Login address
  • Default Username / Login Password
  • Serial number, IMEI, or MAC address

Do not publish a photo of the whole label. Cover passwords, keys, serial numbers, IMEI, QR codes, MAC addresses, and account identifiers before sharing a model photo.

Globe's current Home Prepaid WiFi setup article says its modem sticker can contain the Home Prepaid WiFi number, SSID, password, modem IP, default username, and WLAN key.

Verified Globe and Manufacturer Information

The table uses three evidence states:

  • Official Globe: Globe directly documents the product or workflow.
  • Manufacturer verified: The manufacturer confirms the model and technical category, but the page does not prove every unit is Globe-issued.
  • Reported / verify locally: Search demand and Philippine community/third-party material associate the model with Globe, but the label and active gateway must decide the login facts.
Device or familyWhat is verifiedManagement/login guidanceEvidence state
Globe Home Prepaid WiFi, supported unitsGlobe documents device-label details and dashboard accessUse the IP/hostname and default login printed on the modem; supported instructions use 192.168.254.254, while another Globe workflow uses globebroadband.netOfficial Globe
Globe At Home 5G WiFiGlobe documents screen-led setup, QR/SIM registration, 5G number, and OTP flowStart with the device screen and current Globe 5G instructions; do not assume a legacy LTE dashboardOfficial Globe
HUAWEI AX3 Dual-Core WiFi 6 MeshGlobe documents the AX3 as a mesh product and uses the HUAWEI AI Life appManage the mesh through the app; it is not automatically the upstream Globe ONU/ONTOfficial Globe
Huawei EchoLife EG8145V5Huawei identifies it as a routing-type GPON ONTCheck the installed unit's label, Globe firmware, and gateway; manufacturer identity alone does not confirm the Globe loginManufacturer verified
Huawei OptiXstar EG8145X6-10Huawei identifies it as a GPON WiFi 6 routing-type ONT with 2.4/5 GHz capabilitiesUse the installed label/active gateway; Globe advertises WiFi 6 service equipment but does not make one universal public credential claimManufacturer verified; Globe deployment must be confirmed locally
ZLT S10GQueries and Philippine videos/community posts associate it with Globe Home Prepaid WiFiVerify the label, firmware, gateway, and login on the physical unit before following instructionsReported / verify locally
Huawei B310/B312/B315/B535 LTE CPE familiesThese are Huawei CPE families; older Philippine guides and marketplace listings associate variants with GlobeDifferent variants can use different gateway addresses; do not group them under one loginReported / verify exact variant
FiberHome HG6245D/HG6145-series ONTsThird-party Philippine guides associate variants with Globe fiber installationsTreat menu paths and credentials as firmware-specific; use label and Globe supportReported / verify locally
TP-Link home WiFi / ISP-custom unitsTP-Link PH documents tplinkwifi.net / tplinkmodem.net and common IPsRead the sticker: often 192.168.0.1 or 192.168.1.1; see the 0.1 or 1.1 guidesManufacturer verified pattern; not automatically a Globe unit
ZTE home ONT / gatewayCommon on PH ISP fiber installs; brand + model on the labelOften 192.168.1.1 — use the 192.168.1.1 guide; sticker credentials firstReported / verify locally (ISP firmware varies)
Tozed Home Prepaid WiFi unitsGlobe retail/partner listings have sold Tozed-branded Home Prepaid WiFi hardwareRead the exact model and label; do not infer credentials from a Huawei or ZLT guideProduct-family evidence; model details must be verified

This verification approach avoids a common error in router-login pages: listing every manufacturer beside 192.168.254.254 and implying that all listed models use one gateway and password.

Globe WiFi 6 Modem: What the Term Means

“Globe WiFi 6 modem” describes a service device with WiFi 6 capability, not one permanent model number. Globe's current broadband page advertises a Globe WiFi 6 Modem, but installed hardware can change by plan, location, stock, and deployment period.

WiFi 6 describes the wireless generation. It does not by itself tell you:

  • the manufacturer or model;
  • whether the device is an ONU/ONT, router, CPE, or mesh node;
  • the local management IP;
  • the admin username/password;
  • whether advanced controls are available to the customer role.

Huawei officially describes the EG8145X6-10 as a GPON and WiFi 6 routing-type ONT. That verifies the hardware category. The label and Globe installation determine whether this is the unit in your home.

Router, Modem, ONU/ONT, CPE, and Mesh Are Different Roles

Globe Modem Router ONU Mesh Roles Infographic
Globe Modem Router ONU Mesh Roles
TermRole in a Globe home network
RouterRoutes traffic between the local network and another network; often supplies DHCP and WiFi
Modem-routerCombines service termination and routing functions in one box
ONU/ONTTerminates a fiber-optic connection and can also provide routing, LAN, phone, and WiFi
LTE/5G CPEConnects to a mobile network and shares service through WiFi/LAN
Mesh router/nodeExtends or owns a unified WiFi system; often managed through an app
Access point/extenderProvides or repeats WiFi but may not be the default gateway

The device broadcasting your SSID is not always the same device that terminates Globe service or owns the default gateway. This matters when a mesh system or personal router is installed behind the Globe ONU/ONT.

How to Determine the Correct Login IP

Correct Login IP by Globe Model Infographic
Correct Login IP by Globe Model

If the address on the label does not open, use the guide to fix 192.168.254.254 when the wrong gateway is used before changing any ISP settings.

Use these sources in order:

  1. The Modem IP / Web UI printed on the installed device
  2. The active Default Gateway / Router value on a connected phone or computer
  3. Current Globe instructions for that product family
  4. The official manufacturer manual for the exact model and revision

Common addresses shown in third-party Globe guides include 192.168.254.254, 192.168.100.1, 192.168.18.1, and model-specific alternatives. Their existence is not a reason to try them randomly. The active gateway is the best current evidence for the first router handling the device's traffic.

Use how to find your router IP and default gateway for Windows, Mac, Android, iPhone/iPad, and Linux.

Interface Families and Menu Translation

Once you are inside the matching interface, you can also see connected devices on Globe WiFi under Client List, DHCP Clients, or a similar menu name.

Different firmware can use different words for the same task:

TaskPossible menu names
Change WiFi nameSSID, WLAN Name, Network Name, Basic Settings
Change WiFi passwordWiFi Security, WLAN Security, Pre-Shared Key, WPA Key, Passphrase
View clientsConnected Devices, Client List, Associated Devices, DHCP Clients, LAN Hosts
Block a deviceAccess Control, Blacklist, Deny List, MAC Filter, Device Management
RestartReboot, Restart, System Tools, Maintenance
Change admin passwordAccount, Administration, User Management, System

The presence of a similar menu name does not make steps from another model interchangeable. Save one change at a time and avoid WAN/optical/voice settings unless you have authoritative instructions.

Why Credentials Differ by Model and Firmware

If a forgotten password cannot be recovered from the label or an existing session, read how to restart or factory-reset a Globe router safely before pressing Reset.

Router authentication can be determined by:

  • manufacturer defaults;
  • ISP-customized firmware;
  • a unique password printed on the label;
  • installation-time configuration;
  • user, admin, and support roles with different permissions;
  • a password previously changed by the household owner.

For this reason, this model hub does not publish one “Globe admin password” table. Use the label-first credential decision guide.

Model-Specific Login Workflow

Globe Model Specific Login Workflow Infographic
Globe Model Specific Login Workflow

After the dashboard opens on the correct device, you can change the Globe WiFi password after you reach the dashboard without guessing menu names from another model.

  1. Read and record the manufacturer, model, and hardware revision.
  2. Connect to that device's primary network or LAN.
  3. Read the active default gateway.
  4. Compare it with the label's Modem IP/Web UI value.
  5. Open the matching address in a browser, or use the official app/screen workflow.
  6. Use the label/verified model credentials.
  7. Confirm the interface identifies the expected device.
  8. Stop if the page belongs to a different router or if the instructions require unsupported service credentials.

For supported Home Prepaid WiFi, continue with the Globe router login guide.

When a Model Deserves Its Own Page

A model-specific guide should be published only when these facts are verifiable:

  • Globe deployment or a clearly scoped Philippine service context
  • exact manufacturer and model
  • gateway or management method
  • interface/firmware family
  • credential evidence source without exposing private or unauthorized access
  • menu path for the task
  • reset consequences and support boundary
  • source and last-checked date

Search volume alone does not justify a page that repeats unverified credentials. Until the evidence exists, the model belongs in this hub with a clear verification status.

If Your Model Is Not Listed

That does not mean it is unsupported or fake. Globe can change device stock and firmware. Use the exact label and:

  1. search the manufacturer support site for the model;
  2. check current Globe broadband/help pages;
  3. read the active default gateway;
  4. compare the login-page branding with the label;
  5. contact Globe with the model, service type, and indicator state.

Do not post the full label or accept a stranger's request for remote access, an OTP, a configuration backup, or a superadmin password.

Many people search huawei router login, tp-link router login, or zte router login because the brand is what they see on the box—but the sticker IP and admin credentials are what open the dashboard. This page is the brand hub: brand → common gateway → matching login guide. There are no separate doorway URLs such as /huawei-router-login/; brand intents are folded here with the Globe model table.

Always start with the label (Modem IP / Web UI + Username/Password). If you have Globe Home Prepaid WiFi and the sticker shows 192.168.254.254, use the Globe router login—do not force a Huawei/TP-Link/ZTE IP just because of the brand name.

BrandCommon admin IPCredential ruleLogin guide
Huawei (Mobile WiFi / CPE)192.168.8.1 (sometimes 192.168.1.1 / 192.168.3.1)Sticker / nameplate first; WiFi key is not automatic192.168.8.1 Huawei guide
TP-Link (home WiFi / ISP-custom)192.168.1.1 or 192.168.0.1 (or tplinkwifi.net)Sticker or first-login password create (newer models)192.168.1.1 · 192.168.0.1
ZTE (ONT / home gateway)192.168.1.1 (sometimes an ISP-specific path)Sticker first; ISP firmware can differ192.168.1.1 guide
Globe Home Prepaid WiFi (supported)192.168.254.254Modem sticker (Globe workflow)Globe router login

Model → Brand → Gateway IP → Login Guide

Use this table to map a device family to brand and likely gateway. The “likely IP” is not a warranty—confirm on the sticker and active default gateway.

Model / familyBrandLikely gatewayLogin guideEvidence
Globe Home Prepaid WiFi (supported)Globe (OEM varies)192.168.254.254Globe loginOfficial Globe
Huawei B310 / B312 / B315 / B535 CPEHuawei192.168.8.1 (verify variant)192.168.8.1Reported / verify locally
Huawei Mobile WiFi / LTE MiFiHuawei192.168.8.1192.168.8.1Manufacturer pattern
Huawei EchoLife EG8145V5 / OptiXstar EG8145X6-10HuaweiLabel / active gateway (do not assume 8.1)Find router IPManufacturer verified
HUAWEI AX3 WiFi 6 MeshHuaweiApp-managed (AI Life); web IP is not automaticGlobe mesh + AI Life workflowOfficial Globe
TP-Link home WiFi (retail)TP-Link192.168.0.1 or 192.168.1.10.1 · 1.1Official TP-Link PH pattern
TP-Link ISP-custom 4G/5GTP-Link192.168.1.1 / tplinkmodem.net192.168.1.1Official TP-Link PH
ZTE home ONT / gateway (PH ISP installs)ZTE192.168.1.1192.168.1.1Common PH pattern / verify label
ZLT S10GZLT (Tozed family)Label / active gatewayFind router IPReported / verify locally
FiberHome HG6245D / HG6145-seriesFiberHomeLabel / active gateway (sometimes 192.168.100.1)192.168.100.1Reported / verify locally

Huawei Router Login

Entity: Huawei router / Mobile WiFi / CPE. Primary attribute: local admin IP—often 192.168.8.1 on cellular CPE and MiFi. Not every Huawei home WiFi unit uses 8.1; some models use 192.168.1.1, 192.168.3.1, or an ISP-custom address.

  • Connect to the Huawei device WiFi or LAN (turn off mobile data/VPN first).
  • In the address bar, type http://192.168.8.1/ when that matches the sticker or active gateway.
  • Enter the Username / Password / Admin / Web UI values from the nameplate—do not assume the WLAN key.
  • If a Globe sticker shows 192.168.254.254, do not force 8.1.

Full steps, credential types, and troubleshooting: 192.168.8.1 login (Huawei modem admin guide). If the label shows 192.168.1.1 for a Huawei unit, use the 192.168.1.1 guide.

Entity: TP-Link home router or ISP-customized modem/router. Common admin IPs: 192.168.1.1 and 192.168.0.1. Official TP-Link PH support also documents tplinkwifi.net (routers) and tplinkmodem.net (many DSL/4G/5G units).

  • Connect to the TP-Link WiFi or Ethernet LAN.
  • Try the IP on the sticker; fallback: http://192.168.1.1/ or http://192.168.0.1/.
  • Hostname options: http://tplinkwifi.net/ or http://tplinkmodem.net/—if the hostname fails, fall back to the IP.
  • Credentials: older models often admin/admin; newer models—create an admin password on first login. ISP-custom units: read the label.

Detailed guides: 192.168.1.1 login and 192.168.0.1 login (Tenda/TP-Link notes). This is not Globe Prepaid’s usual gateway (192.168.254.254).

ZTE Router Login

Entity: ZTE ONT / home gateway. Common admin IP in the PH: 192.168.1.1. Some ISP-branded ZTE units use a customized login path or password—so sticker-first still wins.

  • Connect to the ZTE WiFi or LAN.
  • Open http://192.168.1.1/ when that matches the label/gateway.
  • Use the printed username/password; do not trust random “superadmin” lists from blogs.
  • If your Globe sticker shows 192.168.254.254, start there—not with a ZTE default copied from another ISP guide.

Primary deep guide for the 1.1 cluster: 192.168.1.1 login guide. If your active gateway is 192.168.100.1, see the 192.168.100.1 guide.

Brand Login Safety (Local Admin Only)

Huawei / TP-Link / ZTE login is local admin on your device. Do not enter a router password into a random website form. Do not give strangers OTP, remote access, or a full sticker photo. After login, change the default admin password when the firmware allows—and keep the WiFi key separate from the admin password.

Frequently Asked Questions

What router models does Globe use?

Globe has used multiple Home Prepaid WiFi, fiber ONU/ONT, LTE/5G CPE, and mesh products from different manufacturers. The installed model depends on service, plan, location, stock, and installation date.

Is the Globe WiFi 6 modem Huawei?

Some Philippine users report Huawei WiFi 6 ONTs, and Huawei officially makes models such as the EG8145X6-10. Globe's public “WiFi 6 modem” description does not guarantee one model for every installation.

Does Huawei HG8145V5 use 192.168.254.254?

Do not assume so from the model name alone. Check the Globe-customized label and active default gateway. Generic HG8145V5 information may use a different address or firmware.

Is ZLT S10G a Globe router?

It is associated with Globe Home Prepaid WiFi in Philippine search and community material, but login facts must be verified on the installed device label and firmware.

Why is my Globe gateway 192.168.100.1 instead of 192.168.254.254?

Different models and configurations use different LAN subnets. Use the active gateway rather than changing it to match a generic guide.

Can two identical models show different menus?

Yes. Firmware version, ISP customization, hardware revision, and login role can change the interface and available controls.

Where is the model number?

Usually on the back or bottom label, sometimes beneath a removable cover or in the device screen/system-information page.

Is the Huawei AX3 my Globe modem?

The AX3 can be a Globe-provided mesh device, but it may sit behind a separate modem/ONT. Globe manages its documented setup through the HUAWEI AI Life app.

How do I log in to a Huawei router?

Connect to the Huawei WiFi/LAN, open the IP on the sticker (often http://192.168.8.1/), and enter the admin username/password from the nameplate. Full guide: 192.168.8.1 Huawei login.

What IP is used for TP-Link router login?

Usually 192.168.1.1 or 192.168.0.1; also try tplinkwifi.net or tplinkmodem.net when documented. See: 192.168.1.1 and 192.168.0.1.

How do I log in to a ZTE router?

In the PH, http://192.168.1.1/ plus sticker credentials is common. Do not trust unverified superadmin lists. Guide: 192.168.1.1 login.

Is Huawei router login always 192.168.8.1?

No. 8.1 is strongly associated with Huawei Mobile WiFi/CPE, but some Huawei models use another IP. Read the sticker and active gateway.

Is TP-Link 192.168.0.1 or 192.168.1.1?

Both are possible. Many TP-Link home routers use 0.1; many DSL/ISP-custom units use 1.1. The sticker is the final source.

Is 192.168.1.1 a ZTE address in the PH?

Often yes on ZTE ONT/gateway installs, but TP-Link, Huawei, and others also use 1.1. A brand guess is not enough—confirm on the label.

Why is my brand login IP not working?

You may have the wrong gateway, VPN/mobile data enabled, or the real IP is Globe 192.168.254.254. Use find router IP and compare with the sticker.

Sources and Evidence Status

Community and third-party associations are used only to identify model demand. They are not treated as authority for credentials or destructive procedures.

Last reviewed: 11 October 2026

Quick Navigation Dashboard

All login, password, WiFi, reset, model, and IP guides — jump anywhere in the topical map.

  • Free Guides
  • No Signup Required
  • Local Router Help


Open 192.168.254.254